고정 헤더 영역
상세 컨텐츠
본문
반응형
*octoprint plugin 메뉴를 사용하면 정신건강에 좋습니다 급하시면 중간부터 보시길.
참고한 Youtube 동영상을 보면 스마트폰 어플리케이션인 AstroPrint로 Octoprint를 제어함
그러니 plugin을 설치해보기로함 (동영상에는 plugin메뉴로 설치하지만 github source를 이용해보기로함..)
출처: https://www.astroprint.com
AstroPrint 공식 홈페이지: https://www.astroprint.com
출처: https://www.astroprint.com
근데 공식 홈에 들어가보니 전용 이미지(AstroPrint cloud)를 제공함.. 뭐지.. 게다가 패키지 판매까지...
일단 octopi에다가 플러그인으로 설치하려고 한거니 octoprint plugin을 참고하기로함...
문서에보면 plugin을 github에서 다운받아서 설치하는것으로 보임
pip install "https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip"
근데 octopi에 pip 명령이 없음...
그래서 개발환경 패키지를 깔아줌
sudo apt-get install python-pip python-dev python-setuptools python-virtualenv
|
pi@octopi:~ $ sudo apt-get install python-pip python-dev python-setuptools python-virtualenv libyaml-dev build-essential -y [sudo] password for pi: Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version (12.3). python-dev is already the newest version (2.7.13-2). python-virtualenv is already the newest version (15.1.0+ds-1). The following additional packages will be installed: gir1.2-glib-2.0 libgirepository-1.0-1 libpython-all-dev libyaml-0-2 python-all python-all-dev python-cffi-backend python-crypto python-cryptography python-dbus python-enum34 python-gi python-idna python-ipaddress python-keyring python-keyrings.alt python-pyasn1 python-secretstorage python-six python-wheel Suggested packages: libyaml-doc python-crypto-dbg python-crypto-doc python-cryptography-doc python-cryptography-vectors python-dbus-dbg python-dbus-doc python-enum34-doc python-gi-cairo libkf5wallet-bin gir1.2-gnomekeyring-1.0 python-fs python-gdata python-kde4 python-keyczar doc-base python-secretstorage-doc python-setuptools-doc The following NEW packages will be installed: gir1.2-glib-2.0 libgirepository-1.0-1 libpython-all-dev libyaml-0-2 libyaml-dev python-all python-all-dev python-cffi-backend python-crypto python-cryptography python-dbus python-enum34 python-gi python-idna python-ipaddress python-keyring python-keyrings.alt python-pip python-pyasn1 python-secretstorage python-setuptools python-six python-wheel 0 upgraded, 23 newly installed, 0 to remove and 0 not upgraded. Need to get 2,222 kB of archives. After this operation, 8,611 kB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian stretch/main armhf python-pip all 9.0.1-2+rpt2 [179 kB] Get:2 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf libgirepository-1.0-1 armhf 1.50.0-1 [76.4 kB] Get:3 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf gir1.2-glib-2.0 armhf 1.50.0-1 [139 kB] Get:4 http://raspbian.raspberrypi.org/raspbian stretch/main armhf libpython-all-dev armhf 2.7.13-2 [958 B] Get:5 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf libyaml-0-2 armhf 0.1.7-2 [39.9 kB] Get:6 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf libyaml-dev armhf 0.1.7-2 [48.9 kB] Get:7 http://raspbian.raspberrypi.org/raspbian stretch/main armhf python-all armhf 2.7.13-2 [940 B] Get:8 http://raspbian.raspberrypi.org/raspbian stretch/main armhf python-all-dev armhf 2.7.13-2 [962 B] Get:9 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-cffi-backend armhf 1.9.1-2 [60.7 kB] Get:10 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-crypto armhf 2.6.1-7 [253 kB] Get:11 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-enum34 all 1.1.6-1 [35.0 kB] Get:12 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-idna all 2.2-1 [32.6 kB] Get:13 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-ipaddress all 1.0.17-1 [18.1 kB] Get:14 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-pyasn1 all 0.1.9-2 [51.8 kB] Get:15 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-setuptools all 33.1.1-1 [297 kB] Get:16 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-six all 1.10.0-3 [14.4 kB] Get:17 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-cryptography armhf 1.7.1-3+b2 [174 kB] Get:18 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-dbus armhf 1.2.4-1 [178 kB] Get:19 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-gi armhf 3.22.0-2 [499 kB] Get:20 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-secretstorage all 2.3.1-2 [13.8 kB] Get:21 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-keyring all 10.1-1 [40.7 kB] Get:22 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-keyrings.alt all 1.3-1 [16.4 kB] Get:23 http://ftp.harukasan.org/raspbian/raspbian stretch/main armhf python-wheel all 0.29.0-2 [51.7 kB] Fetched 2,222 kB in 17s (128 kB/s) Selecting previously unselected package libgirepository-1.0-1:armhf. (Reading database ... 77544 files and directories currently installed.) Preparing to unpack .../00-libgirepository-1.0-1_1.50.0-1_armhf.deb ... Unpacking libgirepository-1.0-1:armhf (1.50.0-1) ... Selecting previously unselected package gir1.2-glib-2.0:armhf. Preparing to unpack .../01-gir1.2-glib-2.0_1.50.0-1_armhf.deb ... Unpacking gir1.2-glib-2.0:armhf (1.50.0-1) ... Selecting previously unselected package libpython-all-dev:armhf. Preparing to unpack .../02-libpython-all-dev_2.7.13-2_armhf.deb ... Unpacking libpython-all-dev:armhf (2.7.13-2) ... Selecting previously unselected package libyaml-0-2:armhf. Preparing to unpack .../03-libyaml-0-2_0.1.7-2_armhf.deb ... Unpacking libyaml-0-2:armhf (0.1.7-2) ... Selecting previously unselected package libyaml-dev:armhf. Preparing to unpack .../04-libyaml-dev_0.1.7-2_armhf.deb ... Unpacking libyaml-dev:armhf (0.1.7-2) ... Selecting previously unselected package python-all. Preparing to unpack .../05-python-all_2.7.13-2_armhf.deb ... Unpacking python-all (2.7.13-2) ... Selecting previously unselected package python-all-dev. Preparing to unpack .../06-python-all-dev_2.7.13-2_armhf.deb ... Unpacking python-all-dev (2.7.13-2) ... Selecting previously unselected package python-cffi-backend. Preparing to unpack .../07-python-cffi-backend_1.9.1-2_armhf.deb ... Unpacking python-cffi-backend (1.9.1-2) ... Selecting previously unselected package python-crypto. Preparing to unpack .../08-python-crypto_2.6.1-7_armhf.deb ... Unpacking python-crypto (2.6.1-7) ... Selecting previously unselected package python-enum34. Preparing to unpack .../09-python-enum34_1.1.6-1_all.deb ... Unpacking python-enum34 (1.1.6-1) ... Selecting previously unselected package python-idna. Preparing to unpack .../10-python-idna_2.2-1_all.deb ... Unpacking python-idna (2.2-1) ... Selecting previously unselected package python-ipaddress. Preparing to unpack .../11-python-ipaddress_1.0.17-1_all.deb ... Unpacking python-ipaddress (1.0.17-1) ... Selecting previously unselected package python-pyasn1. Preparing to unpack .../12-python-pyasn1_0.1.9-2_all.deb ... Unpacking python-pyasn1 (0.1.9-2) ... Selecting previously unselected package python-setuptools. Preparing to unpack .../13-python-setuptools_33.1.1-1_all.deb ... Unpacking python-setuptools (33.1.1-1) ... Selecting previously unselected package python-six. Preparing to unpack .../14-python-six_1.10.0-3_all.deb ... Unpacking python-six (1.10.0-3) ... Selecting previously unselected package python-cryptography. Preparing to unpack .../15-python-cryptography_1.7.1-3+b2_armhf.deb ... Unpacking python-cryptography (1.7.1-3+b2) ... Selecting previously unselected package python-dbus. Preparing to unpack .../16-python-dbus_1.2.4-1_armhf.deb ... Unpacking python-dbus (1.2.4-1) ... Selecting previously unselected package python-gi. Preparing to unpack .../17-python-gi_3.22.0-2_armhf.deb ... Unpacking python-gi (3.22.0-2) ... Selecting previously unselected package python-secretstorage. Preparing to unpack .../18-python-secretstorage_2.3.1-2_all.deb ... Unpacking python-secretstorage (2.3.1-2) ... Selecting previously unselected package python-keyring. Preparing to unpack .../19-python-keyring_10.1-1_all.deb ... Unpacking python-keyring (10.1-1) ... Selecting previously unselected package python-keyrings.alt. Preparing to unpack .../20-python-keyrings.alt_1.3-1_all.deb ... Unpacking python-keyrings.alt (1.3-1) ... Selecting previously unselected package python-pip. Preparing to unpack .../21-python-pip_9.0.1-2+rpt2_all.deb ... Unpacking python-pip (9.0.1-2+rpt2) ... Selecting previously unselected package python-wheel. Preparing to unpack .../22-python-wheel_0.29.0-2_all.deb ... Unpacking python-wheel (0.29.0-2) ... Setting up python-idna (2.2-1) ... Setting up python-setuptools (33.1.1-1) ... Setting up python-crypto (2.6.1-7) ... Setting up python-pyasn1 (0.1.9-2) ... Setting up python-wheel (0.29.0-2) ... Setting up libpython-all-dev:armhf (2.7.13-2) ... Setting up libgirepository-1.0-1:armhf (1.50.0-1) ... Setting up python-keyrings.alt (1.3-1) ... Setting up python-cffi-backend (1.9.1-2) ... Setting up libyaml-0-2:armhf (0.1.7-2) ... Setting up python-six (1.10.0-3) ... Setting up gir1.2-glib-2.0:armhf (1.50.0-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up python-enum34 (1.1.6-1) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up python-dbus (1.2.4-1) ... Remove stale byte-compiled files... Setting up python-ipaddress (1.0.17-1) ... Setting up python-pip (9.0.1-2+rpt2) ... Setting up python-all (2.7.13-2) ... Setting up libyaml-dev:armhf (0.1.7-2) ... Setting up python-gi (3.22.0-2) ... Setting up python-all-dev (2.7.13-2) ... Setting up python-cryptography (1.7.1-3+b2) ... Setting up python-secretstorage (2.3.1-2) ... Setting up python-keyring (10.1-1) ... pi@octopi:~ $ |
Astroprint Plugin을 설치를 진행
pip install "https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip"
|
pi@octopi:~ $ pip install "https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip" Collecting https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip Downloading https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip / 450kB 680kB/s Complete output from command python setup.py egg_info: Could not import OctoPrint's setuptools, are you sure you are running that under the same python installation that OctoPrint is installed under?
---------------------------------------- Command "python setup.py egg_info" failed with error code 255 in /tmp/pip-CpWtCj-build/ pi@octopi:~ $ |
근데 에러남...
에러를 찾아보니 해결법으로 setuptools를 업글하라는 등의 문서를 찾아 해봄
|
pi@octopi:~ $ pip install --upgrade setuptools Collecting setuptools Downloading https://files.pythonhosted.org/packages/66/e8/570bb5ca88a8bcd2a1db9c6246bb66615750663ffaaeada95b04ffe74e12/setuptools-40.2.0-py2.py3-none-any.whl (568kB) 100% |████████████████████████████████| 573kB 421kB/s Installing collected packages: setuptools Successfully installed setuptools-40.2.0 pi@octopi:~ $ pip install https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip Collecting https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip Downloading https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip - 501kB 759kB/s Complete output from command python setup.py egg_info: Could not import OctoPrint's setuptools, are you sure you are running that under the same python installation that OctoPrint is installed under?
---------------------------------------- Command "python setup.py egg_info" failed with error code 255 in /tmp/pip-FqhTeT-build/ pi@octopi:~ $ pip install ez_setup Collecting ez_setup Building wheels for collected packages: ez-setup Running setup.py bdist_wheel for ez-setup ... done Stored in directory: /home/pi/.cache/pip/wheels/dc/e8/6b/3d5ff5a3efd7b5338d1e173ac981771e2628ceb2f7866d49ad Successfully built ez-setup Installing collected packages: ez-setup Successfully installed ez-setup-0.9 pi@octopi:~ $ pip install unroll Collecting unroll Complete output from command python setup.py egg_info: Downloading http://pypi.python.org/packages/source/d/distribute/distribute-0.6.14.tar.gz Traceback (most recent call last): File "<string>", line 1, in <module> File "/tmp/pip-build-J6BngG/unroll/setup.py", line 2, in <module> ez_setup.use_setuptools() File "/home/pi/.local/lib/python2.7/site-packages/ez_setup.py", line 145, in use_setuptools return _do_download(version, download_base, to_dir, download_delay) File "/home/pi/.local/lib/python2.7/site-packages/ez_setup.py", line 124, in _do_download to_dir, download_delay) File "/home/pi/.local/lib/python2.7/site-packages/ez_setup.py", line 193, in download_setuptools src = urlopen(url) File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen return opener.open(url, data, timeout) File "/usr/lib/python2.7/urllib2.py", line 435, in open response = meth(req, response) File "/usr/lib/python2.7/urllib2.py", line 548, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.7/urllib2.py", line 473, in error return self._call_chain(*args) File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain result = func(*args) File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) urllib2.HTTPError: HTTP Error 403: SSL is required
---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-J6BngG/unroll/ pi@octopi:~ $ pi pic pinentry ping pip pico pinentry-curses ping4 pip2 piconv pinentry-gnome3 ping6 pivot_root pidof pinentry-x11 pinky pi@octopi:~ $ pip install https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip Collecting https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip Downloading https://github.com/AstroPrint/OctoPrint-AstroPrint/archive/master.zip / 491kB 764kB/s Complete output from command python setup.py egg_info: Could not import OctoPrint's setuptools, are you sure you are running that under the same python installation that OctoPrint is installed under?
---------------------------------------- Command "python setup.py egg_info" failed with error code 255 in /tmp/pip-1Sz8Ds-build/ pi@octopi:~ $ |
뭘해도 안됨.. 부들부들
octoprint의 설정에 있는 plugin을 사용해 보기로 함..
도구모양을 눌러서 설정페이지를 열고
Plugin Manager 항목을 클릭 하고
하단에 Get More를 클릭 하면 Search항목이 활성화 됨
Astroprint 를 검색 후 Install 클릭
만약 프린트중이라면 경고창이 뜨고 설치가 안됨...
 |  |
설치 진행상황을 보여주고, Done! 으로 설치 끝
octopi 재시작 메시지가 뜨니 재시작 해주면 됨
프로그램을 재시작 하면 되는거지 pi를 reboot할 필요는 없음
재시작 중에 새로고침하면, 명령어로 octoprint를 시작하라는 페이지가 나오는데 좀더 기다리면 됨
AstroPrint 탭이 추가됨
탭을 보니 Access Key를 입력하라는데 AstroPrint 가입해서 받으면 될 듯
here를 클릭하고 https://cloud.astroprint.com/account/login 접속
출처: https://cloud.astroprint.com/
이미 가입해서 로그인
출처: https://cloud.astroprint.com/
사용자정보 하단에 Advanced Settings에 Access Key를 복사
복사한 key를 붙여넣고 파란색 Link AstroPrint Account 를 클릭
출처: https://cloud.astroprint.com/
오른쪽 yes, i authorize this request 을 클릭하면
AstroPrint Login 메시지가 뜸
AstroPrint 탭에가보면 계정에 있는 파일이 나옴
AstroPrint에서 camera를 사용하려면 설정에있는 API를 허용해야하는데 AstroPrint탭에서 하는게 편함
노란색박스에 Cross Origin Resource Access is disabled 라고 파란글씨로 나와있는데
클릭하면 설정창으로 이동함
Allow Cross Origin Resource Sharing(CORS) 옵션을 켜고 Save
관련 포스팅
[embedded/3D Printer] - Raspberry Pi 라즈베리파이 - Anet A8 연결 4부:Octoprint add on AstroPrint Plugin
[embedded/3D Printer] - Anet A8 핫엔드 노즐청소 (filament remove and hot end nozzle clean)
참고:
- AstroPrint Plugin, https://plugins.octoprint.org/plugins/astroprint/
- How to 3D Print from your smartphone with Raspberry Pi, Octoprint and Astroprint, https://www.youtube.com/watch?v=8m8fDGqDIv8
- https://github.com/AstroPrint/OctoPrint-AstroPrint/blob/master/README.md
반응형
댓글 영역